Aspire Tigon Kit 2600mAh 3.5ml

Description

The Aspire Tigon Stick Starter Kit adopts pen-style shape for easy grip. The Aspire Tigon vape kit comes with 2 type with 1800mAh and 2600mAh inbuilt battery. You will fully enjoy MTL and DTL vape with different frip tips of Aspire Tigon too. The TPD edition of Aspire Tigon has child lock mechanism to provide a safe vaping experience.

The Aspire Tigon Kit comes in two sizes
A non TPD 24.5 mm version with a 3.5ml capacity tank and a 23mm 2ml capacity TPD version. The battery capacity of the 24.5mm Tigon kit is 2600 mAh and the 23mm TPD option of the Tigon kit has a battery capacity of 1800mAh. More than enough to keep you going throughout the day under normal use.

The Tigon kit comes supplied with a choice of MTL
longer style
drip tip and a slightly wider bore ??stubby?? style drip tip more suited to restricted DTL hits.

Filling couldnt be simpler in a child proof/leak proof tank of this type. First pull up on the top cap
then with your thumb or finger on the marker
slide open the top cap to reveal the silicon leak proof seal of the fill port. The silicon fill port on the TPD version tank has a self-sealing valve into which you can insert your chosen filling bottle nozzle to fill the tank. Closing the tank is the opposite
slide the top cap back into place covering the silicon seal and push down.
Remember
when using a new coil
to let the cotton of the coil saturate in the e-liquid for 5 minutes or so before you start to vape. This will ensure that you dont get dry hits or damage the coil.

On the Aspire Tigon tank
coil replacement is just a case of unscrewing the base hardware
pulling out the old coil and replacing with a new one. Then screwing the base hardware back on again. Note that the Tigon tank can still hold e-liquid when changing the coil
this is because the wicking holes in the tank are covered by a spring loaded sleeve that will slide shut sealing the holes when the coil is removed.
Remember
before using a coil for the first time to let it stand for 5 minutes after filling with e-liquid to saturate the coil and avoid dry hit and damage to the coil.

When removing and/or replacing the glass tube on the childproof TPD version of the tank
you need to follow these steps. First
unscrew and remove the base hardware and pull out the coil. Then invert the tank and using the special key provided
unlock the top hardware by placing it in the slot of the screw holding the top hardware (see diagram). Next
remove the glass tube. Replace the glass tube and follow the steps in reverse
(it is easier to place the screw onto the key first to locate it into the top hardware)
secure the screw
insert the coil and replace the base hardware.
Remember
before using a coil for the first time to let it stand for 5 minutes after filling with e-liquid to saturate the coil and avoid dry hit and damage to the coil.

The first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.

Brand: Aspire
Unit: 1Set
Size: 24.5 x 142mm (3.5ml standard)
Capacity: 3.5ml
Coil: 0.4ohm Coil(23-28W)
1.2ohm Coil(10-12W)
Battery: Built-in 2600mAh
Output Voltage: 3.3-4.2V
Continuous Firing Time: 10s
Package: Gift Box

Each set contain:
1pc Tigon Kit(3.5ml
0.4ohm pre-installed)
1pc Glass tube
1pc Extra drip tip
1pc Coil (1.2ohm)
10pc O-rings
1pc Warranty Card
1pc User Manual

Save Money Instructions:

1.Get discount coupon codes before completing the order.
2.Redeem your reward points during checkout.
3.Become one of our wholesale customers to get VIP price
join our wholesale program now.
Your satisfaction is our top priority. Feel free to contact us at any time any place.